DIY Double Chain Beaded Bracelet!!!!


I really like to create jewels and accessories with materials I already have and try something new for me...something that I have never tried before. Playing with beads and chains and colors, actually is something that can really relax you! And lately this is something that I desperately need!

Απολαμβάνω πολύ να δημιουργώ κοσμήματα και αξεσουαρ με υλικά που έχω ήδη και να δοκιμάζω κάθε φορα κα΄τι νέο... κάτι που δεν εχω ξαναδοκιμάσει εως τωρα. Το να παιζω με χαντρες και με αλυσιδιτσες και με τα χρωματα είναι κάτι που μπορεί πραγματικά να με χαλαρώσει! Και τελευταία, το έχω πολύ αναγκη αυτο!




What are we going to need:
– Agate Beads (7 beads of 8mm)
– Gold Plated Stardust Beads (2 beads of 4mm)
– Gold Plated Chain
– Gold Plated Clasp
– Jump Rings ( two different sizes because the  chain has small rings)
– Gold Plated Crimps
– Jewelry wire in gold tones
– Plier Set


Τι θα χρειαστούμε:
- Χάντρες Αχάτη (7 χάντρες των 8mm)
- Επίχρυσες stardust χαντρες (2 χάντρες των 4mm)
- Επίχρυση αλυσίδα
- Επίχρυσο κούμπωμα
- Επίχρυσα κρικάκια (δύο διαφορετικά μεγάθη, γιατι απλά η αλυσίδα μου ήταν λεπτη)
- Επίχρυσα στοπάκια
- Γράνα σε χρυσο χρωμα
- Μυτοτσίμπιδα


Let’s start now building the bracelet and specifically with the beaded part. First cut a piece of jewelry wire and use a crimp on the end to create a loop.

Ας ξεκινήσουμε αρχικά να φτιάξουμε το κομμάτι με τον αχατη και τις χαντρούλες. Κόβουμε πρώτα ένα κομμάτι γράνα και με ένα στοπάκι φτιάχνουμε μια θηλιά στη μία άκρη.



Start with the stardust bead and then add the agate beads and end it again with the second stardust bead. Use the second crimp and make a loop.

Φτιάξτε το όπως σας αρεσει. Εγω εβαλα πρώτα μία χρυση χάντρα, μετα τους αχατες και το τελειωσα πάλι με χρυση χαντρουλα. Με το δεύτερο στοπάκι κλείνουμε και το δευτερο άκρο με θηλια.


The beaded part is ready.

Το βασικο κομμάτι με τις χάντρες ειναι έτοιμο.



Proceed now making the chain part. Measure your wrist and then try to cut a piece of the gold plated chain that the half of it combined with the beaded part will be almost equal to your wrist’s length.

Ας προχωρήσουμε τώρα με το κομμάτι της αλυσίδας. Μετράμε αρχικά τον καρπό μας και έπειτα κόβουμε ένα κομμάτι αλυσίδα το οποίο θα διπλώσουμε στη μέση για να ολοκληρώσουμε το βραχιολι. 



Pleat the chain in the middle and pass the small jump ring. Connect the first jump ring with the second larger one. Repeat the same step on the second end of the chain.

Διπλώνουμε την αλυσίδα στη μέση και βάζουμε ένα μικρο κρικάκι. Συνδέουμε το πρώτο κρικάκι με ένα δευτερο πιο μεγάλο και επαναλαμβάνουμε το ίδιο και στα αλλα ελευθερα άκρα της αλυσιδας.



Connect the first end of the chain with the beaded part.

Συνδεουμε το πρώτο άκρο της αλυσίδας με το κομμάτι με τις χάντρες



and add on the free end of the beaded part the lobster. In order to do this, just use a jump ring.

και στο δευτερο άκρο βάζουμε ένα κρικάκι και το κούμπωμα.



The bracelet actually is ready! Just have in mind to choose a lobster that will feet perfectly with the rest of the jewel and it will look as a really beautiful detail of the bracelet.

Το βραχιόλι είναι έτοιμο! Απλά θα ήταν καλό να έχετε επιλέξει ένα κούμπωμα το οποίο να ταιριάζει όμορφα στο υπόλοιπο σύνολο και να μην ξεχωρίζει τρελα, αλλά να είναι μια ακομα όμορφη λεπτομέρεια. 



What I love about this jewel except the colors is that looks different from every side… same bracelet, different styles!
Τι λατρεύω στο κόσμημα αυτό εκτός φυσικά από τα χρώματα, είναι ότι δειχνει διαφορετικό από κάθε πλευρα...ίδιο βραχιόλι, διαφορετικό στυλ!

Happy Crafting!
post signature

PS. I am proud that the specific Jewelry making tutorial is also in the Pandahall Blog!

No comments :

Post a Comment

Thank you for visiting my blog and for your comment!

BRs,
EfZin